Inspection of buildings, structures and engineering networks KamaEnergo

Requirements for inspection of buildings are clearly spelled out in the interstate standard "GOST 31937-2011". Buildings and structures are subject to wear and aging during the impact of various loads and external factors. It's difficult for a specialist to see signs of aging. complex work of professionals is necessary. The task of such inspections is to establish the actual state of the structures, detect defects, damage and assess the operational reliability, which will allow the building to be used competently in the long term, and in a timely manner to prevent cash losses associated with deterioration of the technical characteristics of the facility. We offer the following types of work: * Comprehensive engineering and technical survey of buildings and structures (houses, industrial shops, boiler rooms, expertise of individual structures); * Execution of falsework, drawing up of dimensional and sketch drawings of building structures, buildings and structures; * Perform instrumental measurements and tests; * Performing verification calculations to determine the bearing capacity of building structures; verification of heat engineering calculations of building structures. Technical inspection of buildings consists of three stages 1. Preparation for the survey. Specialists get acquainted with the object of research, its volumetric-planning and constructive solution, analyze design and technical documentation and make a program of work in accordance with the technical task. 2. Visual examination. Specialists conduct a preliminary assessment of the strength of structures, identify obvious defects and violations in operation, determine the degree of environmental impact, on the basis of a defective sheet determine the scope of further work on the inspection of structures. 3. Detailed instrumental examination. Experts perform measurements of geometric parameters of buildings or structures, nodes, instrumentally determine the parameters of defects and loads, create a design scheme of the structure, calculate the load-carrying capacity of the building's structures, analyze the causes of defects. On the basis of these data, a TECHNICAL CONCLUSION will be prepared for you, including: * description of the condition of the structures and the degree of their wear and tear; * verification calculations, which determine the technical condition of the building (workable, limited-operational or emergency); * recommendations in accordance with the terms of reference, containing measures to restore the load-bearing capacity of structures or the building as a whole; * prediction of the behavior of the structure during its further operation. Who needs to monitor buildings and networks? Specialists of the company "KAMA-GROUP" will help you get a complete picture of the condition of the structures and avoid material costs and negative consequences, thanks to timely monitoring of the facility. * The building is put into operation. * Significant damages, weak knots, defects and deformation of structures, evidencing the development of a resource of reliability and security of the building. * The service life of the facility is expiring. * Damage to the object as a result of anthropogenic impact (fire, flood, hurricane). * There is a need to conduct a general monitoring of a building or structure. * Change the destination of the object. * Pre-project research to collect information on the implementation of the project of reconstruction, major repairs of the facility. * The order of authorized bodies (bodies of state construction supervision, judicial bodies). What do you get after completing a comprehensive survey? -After all the measures described above, the customer will receive a technical report or a technical conclusion consisting of a graphic and text part. In the text part, the whole complex of the survey is described, and in the graphical there is a theory, documents provided by the customer (sections of facades, design sheets and plans, details of structures). There are also drawings for the elimination of defects, recommended technical solutions, a photograph of the object and a copy of the license. - Having received a technical report, the developer or the customer keeps it until the final inspection is carried out by the state construction supervision bodies, which the report represents, for temporary use. After this body issues an opinion that the building meets all technical requirements for operation, regulatory acts and project documentation, the technical report is returned to the developer or customer and remains with them for permanent storage. What factors affect the cost of work? * Initial documentation (project documentation, BTI passport, past reports) availability, timely provision * Location of the object. * What is the purpose of the work? Their complexity in view of the purpose of the object? * Are there any separate laboratory tests, autopsies or surveys?