Description
Offer to buy nonwoven thermally bonded geotextile "Geoflex" to give additional stability to the structures. Despite the fact that the thermally bonded geotextile allows water to enter only in the transverse direction, it has higher explosive loads compared to needle-punched geotextile of similar density. The company GeoSM recommends the use of thermally bonded geotextiles, when the head of the corner – strength and reinforcing ability of the fabric.
Advantages of geotextile nonwoven Thermo "Geoflex"
+The use of geotextiles can save up to 25% of building materials compared to concrete reinforcement and increase the overhaul period is three times.
+ In the production of our geotextile fibers are formed directly from the melt of polymers with further bond not only with igloprobivnye, but additionally termoelektrana, so that the material can withstand higher tensile strength.
Geotextiles can be operated at a temperature of from 90 °C to -60 °C. the High modulus of elasticity allows to distribute even heavy loads efficiently. Geotextile non-woven thermally bonded "Geoflex" for small deformations of the function of reinforcement. In case of local mechanical damage to the canvas is not destroyed. Geotextile elastic that allows you to extend the use of structures.
Geotextile simple installation, ease and low weight of the rolls allows to save on transportation and storage. In addition, the rolls can be easily cut on the spot in preparation for the installation.
Heat-treated geotextile used in road construction for reinforcement reason. It also applies if you need to divide several layers of gravel, soil or asphalt. When the device of sidewalks and walking paths, he avoids leaching of soil and subsidence of the coating.
Non-woven thermally bonded geotextile may be used when equipped with anti-erosion and traffic (road and rail) structures, while reinforcing the coastline and strengthening of embankments on soft ground. It is used in construction, for the construction of retaining walls and foundations, roofs (green and conventional). Used in landscaping for ponds, flower beds and rock gardens.
Characteristics
- Breaking load, kN / m
- 4,5-24,8 2,6-21
- Thickness at a pressure of 2.0 kPa, mm
- 0,6-3,5
- Elongation at break,%
- 120-150
- Coef. filtration at a pressure of 2.0 kPa, m3 / day, not less
- 20
- Surface density, g / m2
- 100-600








